< Back


The Scania 450 - 550 kVA range provides reliable power for today's world with a competitive offering that delivers everything you need. Providing unrivalled quality, the 450 - 550 kVA range of products offers a trusted performance with an enhanced choice of options, optimising the range for a variety of diverse applications and environments. Designed with the demands of today's world in mind, this range will deliver power solutions in all sectors, from industry and retail to finance and healthcare.

Generator Set Specifications

Minimum Rating 410.0 kVA / 328.0 kW 410.0 kVA / 328.0 kW Less
Maximum Rating 450.0 kVA 360.0 kW 450.0 kVA 360.0 kW Less
Emissions/Fuel Strategy Fuel optimised Fuel optimised Less
Voltage 127-440 Volts 127-440 Volts Less
Frequency 60 Hz 60 Hz Less
Speed 1800 RPM 1800 RPM Less
60 Hz Standby 450.0 kVA 360.0 kW 450.0 kVA 360.0 kW Less
50 Hz Prime - / - - / - Less
50 Hz Standby - / - - / - Less
60 Hz Prime 410.0 kVA / 328.0 kW 410.0 kVA / 328.0 kW Less

Engine Specifications

Engine Model Scania DC13072A Scania DC13072A Less
Compression Ratio 16.3:1 16.3:1 Less
Governor Type Electronic Electronic Less
Bore 130.0 mm (5.1 in) 130.0 mm (5.1 in) Less
Stroke 160.0 mm (6.3 in) 160.0 mm (6.3 in) Less
Displacement 12.7l (775.0 cu. in) 12.7l (775.0 cu. in) Less

Scania Engine

Scania Engine


Benefiting from a choice of leading alternators, the range incorporates the WEG alternator as standard across three phase models.

Design Criteria

Prime Rating These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Rating These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3). Standard Reference Conditions Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m (328 ft) A.S.L. 30% relative humidity. Fuel consumption data at full load with diesel fuel with specific gravity of 0.85 and conforming to BS2869: 1998, Class A2.

Single-Source Supplier

Fully prototype tested with certified torsional vibration analysis available

World Wide Product Support

FG Wilson manufactures product in the following locations: Northern Ireland • Brazil • China • India • USA With headquarters in Northern Ireland, FG Wilson operates through a Global Dealer Network.

PowerWizard 1.1

PowerWizard – Providing safe control of your generator set The FG Wilson PowerWizard range of digital control panels, combine straightforward menu navigation with advanced metering and protection technology. They are used in automatic mains failure applications in conjunction with transfer panels. Our PowerWizard range allows you to monitor and control your generator set with ease, whilst ensuring your unit operates within safe parameters and provides important diagnostic information when needed.

S450-1 Standard Equipment

  • Air Cleaner
  • Lube oil drain valve
  • High Coolant Temperature Shutdown
  • Low Oil Pressure Shutdown
  • Fully adjustable elelctronic governor

  • Package mounted radiator
  • Radiator fan and charging alt guards
  • Coolant Drain Valve
  • Cooling System filled with Coolant mix

  • Exhaust stub pipe and gasket

  • 8 Hr Fuel Tank
  • BSP fuel sockets

  • WEG
  • IP21 Protection

Control Panel
  • PowerWizard 1.1

  • Engine mounted battery charging alternator
  • Robust steel constructed base frame
  • Base frame drag and lift points
  • Wet battery, connection cables, tray and clamp

S450-1 Optional Equipment

  • Industrial, Residential, Critical Silencers

  • 3 Pole circuit breaker
  • 3 Pole motorised circuit breaker

Control Panels
  • PowerWizard 1.1+ Control Panel (PWT1.1+)
  • PowerWizard 2.1 Control Panel (PWT2.1)

  • Lead Acid battery (Dry)
  • Battery Removal

  • Sound attenuated enclosure with single point lift (CAE)
  • Lube oil drain to edge of base frame
  • Coolant drain to edge of base frame